The straps and screws of robust pipe clamp  are designed for strong tightening force and have strong torque. Therefore, the robust pipe clamp  is a kind of strong clamp and has a wide range of uses. Today’s case is used on a 4-inch beef tendon pipe. , European-style strong clamps can strongly clamp the pipes, can clamp the pipes strongly, and are not easy to fall off after clamping, so how to choose the specifications of the European-style strong clamps? How to install it? The methods are as follows: 1. Measure the diameter of the pipe: only by measuring the diameter of the pipe can the size of the European-style strong clamp be selected.

When measuring, the larger size value is the diameter of the pipe. As shown in the example in the figure, the diameter of the measured pipe is 118mm, which is a 4-inch pipe. We go to the European clamp specification table to select the corresponding specification, there are A size of 113-121, because 118mm is included, and after the European-style clamp of this size is put on, it is just right, so choose the size of 113-121.

2. Installation method: Before installing the pipe, put the European-style strong clamp on first, and then insert the pipe as far as possible, so that the more connections between the pipe and the iron pipe, the better. Move the European-style strong clamp to the middle of the joint of the beef tendon tube and the iron tube, and tighten it with a wrench or other tools. 3. Inspection after installation Sometimes we think that it is tightened, but sometimes the European-style clamp is installed obliquely, and it is strong when it is on, but when the tube is swayed.